ADSP-BF526 EZ-Board Evaluation System Manual
1-3
Using The ADSP-BF526 EZ-Board
Package Contents
Your ADSP-BF526 EZ-Board evaluation system package contains the fol-
lowing items.
• ADSP-BF526 EZ-Board
• Universal 5.0V DC power supply
• Ethernet patch cable
• Two 3.5 mm male-to-male audio cables
• Two mini USB 2.0 cables for USB on-the-go (OTG)
If any item is missing, contact the vendor where you purchased your
EZ-Board or contact Analog Devices, Inc.
Default Configuration
The ADSP-BF526 EZ-Board is designed to run outside your personal
computer as a standalone unit. You do not have to open your computer
case.
When removing the EZ-Board from the package, handle the board care-
fully to avoid the discharge of static electricity, which can damage some
components.
show the default jumper and switch settings, con-
nector locations, and LEDs used in installation. Confirm that your board
in the default configuration before using the board.
The EZ-Board evaluation system contains ESD (electrostatic discharge) sen-
sitive devices. Electrostatic charges readily accumulate on the human body
and equipment and can discharge without detection. Permanent damage may
occur on devices subjected to high-energy discharges. Proper ESD precau-
tions are recommended to avoid performance degradation or loss of function-
ality. Store unused EZ-Boards in the protective shipping package.
