Using the NetLinx Module to Program the ViewStat
54
ViewStat Communicating Thermostat
Command Interface - SEND_COMMANDs (Cont.)
Command Description
'T-<tstat> DATE-<val>'
Set date.
Parameters:
• <tstat> : id of thermostat/zone
• <val> : MMDDYY
Example:
'T-1 DATE-030894'
'T-<tstat> DATE?'
Requests current date on thermostat
'T-<tstat> DEHUMIDIFY-<val>'
Set dehumidify set point.
Parameters:
<tstat> : id of thermostat/zone
<val>:
+ = Increase dehumidify set point by one percent
- = Decrease dehumidify set point by one percent
10-90 = dehumidify set point (in percent)
Example:
'T-6 DEHUMIDIFY-70'
'T-<stat> DEHUMIDIFY?'
Query for current dehumidify set point.
Parameter:
• <tstat> : id of thermostat/zone
Example:
'T-1 DEHUMIDIFY?'
'T-<stat> FAN?'
Query for current fan state.
Parameter:
• <tstat> : id of thermostat/zone
Example:
'T-2 FAN?'
'T-<tstat> FMODE-<val>'
Set fan mode.
Parameters:
• <tstat> : id of thermostat/zone
• <val> : 0 = let thermostat control the fan
1 = turn fan on
T = toggle fan mode
Example:
'T-12 FMODE-AUTO'
'T-<stat> FMODE?'
Query for current fan mode.
Parameter:
• <tstat> : id of thermostat/zone
Example:
'T-2 FMODE?'
Summary of Contents for ViewStat
