background image

 

1

TMST-2B-ZBS Thermostat 

 

Introduction 

TMST-2B-ZBS is a battery powered ZigBee Thermostat. It is designed to be incorporated into household heating and 
cooling system for home environment control. The Thermostat can be operated manually using the LCD screen and 
buttons, or accessed remotely via ZigBee network. It feature Cooling, Heating, Auto modes with temperature set point and 
automatic schedule for you to control your home environment easily. 
The Thermostat utilizes ZigBee technology for wireless signal transmission. ZigBee is a wireless communication protocol 
that is reliable and has low power consumption and high transmission efficiency. Based on the IEEE802.15.4 standard, 
ZigBee allows a large amount of devices to be included in a network and coordinated for data exchange and signal 
transmission 
The Thermostat serves as an end device in the ZigBee network. It can be included in the ZigBee network to transmit signal 
upon activation, but cannot permit any other ZigBee device to join the network through the Thermostat.   

 

Parts Identification 

1. LCD Display 

The LCD displays the following information: 

 

A.  ZigBee network connectivity icon          will be displayed when the Thermostat 

has joined ZigBee network and is within signal range.

 

B.  The current mode will be displayed when the Up, Down or Mode button is 

pressed.

 

      Cool: 

 Heat: 

 

Auto:  Interval flash between     and  

 Fan: 

C.  Current time and weekday   

D. Away mode icon      will be displayed when Thermostat is under Away 

mode. 

E.  The temperature can displayed in Celsius or Fahrenheit format.   

2. Low Battery LED Indicator 

The LED flashes when low battery voltage is detected 

3. Test / ZigBee Network Button 

- Press the button once to:   

Send a supervision signal with temperature and set point info. 

- Press and hold for 10 seconds then release to reset the Thermostat.   

4. Down Button 

Press the button to change set point. 

5. Up Button 

Press the button to change set point. 

6. Mode Button 

Press the button to change Thermostat mode. 

7. Away Button 

Press the button to change Thermostat to Away Mode. 

8. Wall Mounting Holes 

Summary of Contents for TMST-2B-ZBS







Reviews: