AMX ViewStat, Instruction Manual

Page: 53 / 76

Set Up and Configuration
47
ViewStat Communicating Thermostat
Security Set-Up
This prevents unauthorized individuals from accessing Thermostat Set-Up. A code can be setup
that must be entered to gain entry into Thermostat Set-Up (FIG. 35).
FIG. 36 shows the display when a password has been activated, and entry into Thermostat Set-Up
menu is attempted..
To reset the password to 7777, you must cycle power to the ViewStat.
FIG. 35 Security set-up
Set New Password
More
Security
Set Up More
Remove
Password Next
ConfirmCode ####
change accept
EXIT
Back
Enter Lockout
Code
after 4th digit entered
after 4th digit entered
The master key password is 7777.
FIG. 36 Master key password
Code Incorrect
Security is On
Enter Code
Code Accepted
after unsuccessful
attempt
after 3rd unsuccessful
attempt
return to
Passive display
go to
Main Menu
after successful
attempt
auto - 5 sec.
Auto - 5 sec.
after 1st and 2nd unsuccessful attempt
An easy way to cycle power on the ViewStat without having to remove power from the
HVAC system is to remove the ViewStat faceplate from the base (see FIG. 2 and
FIG. 3 on page 8), then replace it.