![background image](http://html.mh-extra.com/html/amx/nxa-wap250g/nxa-wap250g_operation-reference-manual_2939423011.webp)
Installation
7
NXA-WAP250G 802.11b/g Wireless Access Point
Reset Button Overview
The Reset Button (shown in FIG. 7) is used to either restart the WAP-250G or restore the unit to its
factory default settings.
If you hold down the button for
less than 10 seconds
, the WAP will perform a hardware reset.
Is you hold down the button for
more than 10 seconds
, any current configuration changes and
settings (
such as IP Address, MAC Address, security, etc.
) are deleted and all of the unit’s
parameters are rest the factory defaulted settings.
LED Indicators
The access point includes three status LED indicators, as described in the following figure and table.
FIG. 4
NXA-WAP250G Component Locations
LED
Status
Description
POWER
On Green
Indicates that the system is working normally.
WLAN
On/Flashing Green Indicates the 802.11g radio is enabled and transmitting or receiving data
through wireless links. The flashing rate is proportional to network activity.
Off
Indicates the 802.11g radio is disabled.
LAN
On/Flashing Green Indicates a valid link on the Ethernet port and that the access point is transmit-
ting or receiving data. The flashing rate is proportional to network activity.
Off
The Ethernet port has no valid link.
Power Socket
Ethernet LAN Port
(CAT5)
Antenna
Top View
Bottom View
WallMount Slots
Reset Button
Summary of Contents for NXA-WAP250G
Page 26: ...Initial Configuration 22 NXA WAP250G 802 11b g Wireless Access Point ...
Page 54: ...System Configuration 50 NXA WAP250G 802 11b g Wireless Access Point ...
Page 58: ...Appendix A Troubleshooting 54 NXA WAP250G 802 11b g Wireless Access Point ...
Page 59: ...Glossary 55 NXA WAP250G 802 11b g Wireless Access Point ...