![background image](http://html.mh-extra.com/html/amx/nxa-wap250g/nxa-wap250g_operation-reference-manual_2939423043.webp)
System Configuration
39
NXA-WAP250G 802.11b/g Wireless Access Point
Auto
: Uses TKIP for the multicast cipher and TKIP or AES for the unicast cipher
depending on the capability of associated clients.
AES
: Uses AES keys for both multicast and unicast encryption.
TKIP
: Uses TKIP keys for both multicast and unicast encryption.
WPA-PSK Key
: Enter a key as an easy-to-remember form of letters and numbers. The key
must be from 8 to 63 ASCII characters, which can include spaces and is case sensitive. All
wireless clients must be configured with the same key to communicate with the VAP
interface.
Network Settings
The WAP-250G supports DHCP client, DHCP server and Network Address Translation (NAT). Point-to-
Point Protocol over Ethernet (PPPoE) is also supported for users that have an IP address assigned
automatically from an Internet service provider (ISP) through an ADSL modem. Use the options on the
Network Settings pages to configure the LAN and WAN network settings (FIG. 35).
Network Settings - DHCP Client Setting
Configuring the WAP-250G with an IP address enables you to manage the WAP-250G from any PC in
the attached network. A number of WAP-250G features depend on IP addressing to operate.
By default, the WAP-250G is configured with the IP address
192.168.1.240
, with the DHCP client
disabled
(FIG. 36).
FIG. 35
Network Settings - main page
You can connect to the web browser interface to access IP addressing only if the
WAP-250G already has an IP address that is reachable through your network.
Summary of Contents for NXA-WAP250G
Page 26: ...Initial Configuration 22 NXA WAP250G 802 11b g Wireless Access Point ...
Page 54: ...System Configuration 50 NXA WAP250G 802 11b g Wireless Access Point ...
Page 58: ...Appendix A Troubleshooting 54 NXA WAP250G 802 11b g Wireless Access Point ...
Page 59: ...Glossary 55 NXA WAP250G 802 11b g Wireless Access Point ...