AMX NXA-WAP250G Operation/Reference Manual Download Page 31 | Manualshive

Page: 31 / 60

background image

System Configuration

27

NXA-WAP250G 802.11b/g Wireless Access Point

Open-system authentication accepts any client attempting to connect to the WAP-250G
without verifying its identity. The shared-key approach uses Wired Equivalent Privacy (WEP)
to verify client identity by distributing a shared key to clients before attempting
authentication.

Associated

: Shows if the client has been successfully associated with the WAP-250G. Clients

can associate with the WAP-250G only after authentication has completed.

Encryption

: Indicates if encryption is being used by the client; either Enabled or Disabled.

Cipher

: Indicates the encryption cipher capability being advertised by the client; WEP, TKIP,

AES, or None.

SSID

-- The VAP interface that the client is associated with.

RSSI

-- The received signal strength of the client.

Information - Network

The

Network

page displays the current Dynamic Host Configuration Protocol (DHCP) client, DHCP

server, and Point-to-Point Protocol over Ethernet (PPPoE) status (FIG. 22).

The items on this page include:

DHCP Client Setting

: Displays whether the DHCP Client Setting is enabled or disabled.

Enabled indicates the WAP-250G is set to acquire an IP address from the DHCP server.
Disabled indicates the WAP-250G is set manually to a static IP address (recommended). The
default setting is Disabled. This field is view-only.

DHCP Server/NAT Setting

: Displays whether the DHCP Server/NAT Setting is enabled or

disabled. The WAP-250G DHCP server can assign IP addresses to any wireless client
requesting the service. Addresses are assigned to clients from a common address pool
configured on the Network > DHCP Server/NAT page. The default setting is Disabled. This
field is view-only.

PPPoE Setting

: Displays whether the PPPoE Setting is enabled or disabled. Enables a

connection to an Internet service provider using PPPoE. The PPPoE access user name and
password can be set on the Network > PPPoE page. The default setting is Disabled. This field
is view-only.

FIG. 22

Network Information

«
...
29
30
31
32
33
...
»

Summary of Contents for NXA-WAP250G





























































Reviews:

No comments

Related manuals for NXA-WAP250G

AirConnect 9550

Brand: 3Com Pages: 68

Brand: KoamTac Pages: 11

Nfiniti AirStation WZR-AGL300NH

Brand: Buffalo Tech Pages: 24

Jetpack MiFi 4510L

Brand: Verizon Pages: 88

Brand: TERABEAM Pages: 10

Brand: Z-Com Pages: 38

Brand: TP-Link Pages: 2

Brand: Ebyte Pages: 13

Brand: H3C Pages: 447

Brand: Gembird Pages: 57

Brand: P1 Pages: 10

Brand: Linksys Pages: 123

Brand: Asus Pages: 5

Brand: Asus Pages: 60

Brand: Asus Pages: 26

Brand: Asus Pages: 70

Brand: Asus Pages: 70

Brand: Asus Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands