![background image](http://html.mh-extra.com/html/amx/nxa-wap250g/nxa-wap250g_operation-reference-manual_2939423017.webp)
Initial Configuration
13
NXA-WAP250G 802.11b/g Wireless Access Point
Using the Setup Wizard
There are only a few basic steps you need to set up the NXA-WAP250G and provide a connection for
your AMX Control Panel and network access for other wireless devices.
The Setup Wizard takes you through configuration procedures for the general network settings, such as
IP configuration, wireless network name (Service Set Identifier), and wireless security. Follow these
steps:
To begin, login and select
Start with Setup Wizard
on the home page (FIG. 5).
Step 1: Operation Mode Setting
Select an operation mode according to how the unit will be used in your network (FIG. 6).
There are two operation modes:
AP
: Set the device as an Access Point. The device can also act as a root bridge in a wireless
bridge network.
Repeater & Bridge:
Set the device as a Wireless Repeater. The
Root AP MAC Address
can be
assigned manually or selected after clicking
Scan
.
Click
Next
to proceed.
FIG. 6
Setup Wizard - Operation Mode setting
Summary of Contents for NXA-WAP250G
Page 26: ...Initial Configuration 22 NXA WAP250G 802 11b g Wireless Access Point ...
Page 54: ...System Configuration 50 NXA WAP250G 802 11b g Wireless Access Point ...
Page 58: ...Appendix A Troubleshooting 54 NXA WAP250G 802 11b g Wireless Access Point ...
Page 59: ...Glossary 55 NXA WAP250G 802 11b g Wireless Access Point ...