![background image](http://html.mh-extra.com/html/amx/nxa-wap250g/nxa-wap250g_operation-reference-manual_2939423044.webp)
System Configuration
40
NXA-WAP250G 802.11b/g Wireless Access Point
The items on this page include:
DHCP Client Setting
: Enables the WAP-250G to automatically obtain an IP address from a
DHCP server. If a response is not received from the DHCP server, the WAP-250G uses the
fixed IP settings as configured on this page. When set to disabled, a static IP address can be
manually configured.
Static IP Address
: The IP address of the WAP-250G. Valid IP addresses consist of four
decimal numbers, 0 to 255, separated by periods.
Subnet Mask
: The mask that identifies the host address bits used for routing to specific
subnets.
Default Gateway
: The default gateway is the IP address of the router for the WAP-250G,
which is used if the requested destination address is not on the local subnet. If you have
management stations located on another subnet, type the IP address of the default gateway
router in the text field provided. Otherwise, leave the address as all zeros (0.0.0.0).
DNS IP Address
: The IP address of a Domain Name Server on the network. A DNS maps
numerical IP addresses to domain names and can be used to identify network hosts by familiar
names instead of the IP addresses. The DNS is shared between the Ethernet port and the NAT
server.
If you have a DNS server located on the local network, type the IP address in the text field
provided. Otherwise, leave the address as all zeros (0.0.0.0).
FIG. 36
Network Settings - DHCP Client Settings
Summary of Contents for NXA-WAP250G
Page 26: ...Initial Configuration 22 NXA WAP250G 802 11b g Wireless Access Point ...
Page 54: ...System Configuration 50 NXA WAP250G 802 11b g Wireless Access Point ...
Page 58: ...Appendix A Troubleshooting 54 NXA WAP250G 802 11b g Wireless Access Point ...
Page 59: ...Glossary 55 NXA WAP250G 802 11b g Wireless Access Point ...