Battery Removal and Replacement
17
Battery Replacement & Firmware Upgrade - 5.2” Modero ViewPoint Touch Panels
Battery Removal and Replacement
Overview
After the device’s panel files have been retrieved and saved, the next step is to remove the existing battery from
the device and replace it. This installation requires one of the three MVP-BP-5X battery kits for the three
devices:
FG5966-01BAT (MVP-5200i-BK only)
FG5966-02BAT (MVP-5200i-GW only)
FG5966-07BAT (MVP-5100 and MVP-5150)
ATTENTION - READ THIS FIRST!
Lithium-Polymer batteries are small, compact, and ideal for providing long lasting power. However, they must
be used and charged properly. Improper use can result in serious injury, fire, or explosion.
Please read and understand the following warnings. If you have any questions or concerns with this product,
please contact AMX.
To Avoid Injury, Never:
Use near open flame or other heat source
Puncture or disassemble battery
Damage external contacts
Dispose of battery in fire, water, or container with temperature above 100ºC (212ºF).
Always:
Use only with AMX approved battery charger
Store in dry place with temperature between 0° C (32° F) and 40° C (104° F)
IMPORTANT NOTES!
This installation requires opening the case of the MVP-5200i, MVP-5100, or
MVP-5150 and working within its internal components. If you are unwilling or
unable to replace the battery, please return the device to AMX for battery
replacement.
Misuse of a Lithium-Polymer battery may result in overheating, fire, or
explosion!
Care must be taken during installation to ensure that the battery is not
damaged.
Lithium-Polymer battery technology degrades in capacity over time, unless the
battery is periodically charged and discharged. AMX recommends installing all
Lithium-Polymer batteries in functional AMX products within 6 months of receipt.
Summary of Contents for Modero Viewpoint MVP-5200i
Page 4: ......
