![background image](http://html1.mh-extra.com/html/amx/fg2105-08/fg2105-08_operation-reference-manual_2937837037.webp)
Configuration and Firmware Update
31
NI-3101-SIG Signature Series NetLinx Integrated Controller
12.
Complete the communication process by continuing on to the
Communicating with the NI Device
via an IP
section on page 31.
Communicating with the NI Device via an IP
Whether the on-board Master’s IP Address was Static Set (Set IP Info) or Dynamically obtained (Get IP
Info), use the IP Address information from the Network Addresses dialog to establish communication
via the Ethernet-connected Integrated Controller.
1.
From your PC, launch NetLinx Studio 2.
2.
Obtain the IP Address of the Master from the System Administrator. If you still do not have an IP
Address, follow the steps outlined in either the
Obtaining the Master’s IP Address (using
DHCP)
section on page 28 or
Assigning a Static IP to the NetLinx Master
section on page 30.
3.
Select
Settings
>
Master Communication Settings
from the Main menu to open the
Master
Communication Settings
dialog (FIG. 21).
4.
Click the
Communications Settings
button to open the Communications Settings dialog (FIG. 22).
5.
Click on the
NetLinx Master
radio button to indicate you are working with a NetLinx Master, and
click on the
TCP/IP
radio button to indicate a connection to the Master via an IP Address.
FIG. 21
Master Communication Settings dialog box
FIG. 22
Communications Settings dialog box