![background image](http://html1.mh-extra.com/html/amx/fg2105-08/fg2105-08_operation-reference-manual_2937837122.webp)
NetLinx Security within the Web Server
116
NI-3101-SIG Signature Series NetLinx Integrated Controller
10.
Some circumstances might open a Connection Details dialog (FIG. 76) requesting a VNC Server IP
Address. This is not the IP of the Master but of the target touch panel. Depending on which method
of communication you are using, it can be found in either the:
Wired Ethernet
- System Connection > IP Settings section within the
IP Address
field.
Wireless
- Secondary Connection > IP Settings section within the
IP Address
field.
If this field does not appear, continue to step 11.
11.
If a WebControl password was setup on the G4 WebControl page, a G4 Authentication Session
password dialog box appears on the screen within the secondary browser window.
12.
Enter the WebControl session password into the Session
Password
field (FIG. 75).
This password
was previously entered into the Web Control Password field within the G4 Web Control page on the
panel.
13.
Click
OK
to send the password to the panel and begin the session. A confirmation message appears
stating
"Please wait, Initial screen loading..".
The secondary window then becomes populated with the same G4 page being displayed on the target G4
panel. A small circle appears within the on-screen G4 panel page and corresponds to the location of the
mouse cursor. A left-mouse click on the computer-displayed panel page equates to an actual touch on the
target G4 panel page.
What to do when a Certificate Expires
Self-generated certificates have a duration period of approximately 30 years. Most externally requested
CA certificates are generally valid for a period of approximately 1 - 5 years.
The only way to avoid a CA certificate becoming invalid due to a time expiration is to request a
new certificate from your current CA.
Refer to the
Server - Creating a Request for an SSL Certificate
section on page 81 for more information
on how to request an externally generated certificate.
FIG. 76
Connection Details dialog
IP Address of touch panel
- obtained from IP Settings section of
the panel’s System Connection page