![background image](http://html1.mh-extra.com/html/amx/fg2105-08/fg2105-08_operation-reference-manual_2937837138.webp)
NetLinx Security with a Terminal Connection
132
NI-3101-SIG Signature Series NetLinx Integrated Controller
The FTP Security and Admin Change Password Security are always enabled and cannot be
disabled.
Help menu
Type
help
at the prompt in the Telnet session to display the following help topics:
Help Menu Options
Command
Description
----- Help ----- <D:P:S>
(Extended diag messages are OFF)
<D:P:S>
: Device:Port:System. If omitted, assumes Master.
? or Help
Displays this list.
DATE
Displays the current date.
DEVICE HOLDOFF ON|OFF
Sets the Master to holdoff devices (i.e. does not allow them to report
ONLINE) until all objects in the NetLinx program have completed
executing the
DEFINE_START
section.
If set to
ON
, any messages to devices in
DEFINE_START
will be lost,
however, this prevents incoming messages being lost in the Master
upon startup. When
DEVICE_HOLDOFF
is
ON
, you must use
ONLINE
events to trigger device startup
SEND_COMMAND
s.
By default,
DEVICE HOLDOFF
is
OFF
to maintain compatibility with
Axcess systems where
f
devices are initialized in
DEFINE_START
.
DEVICE STATUS <D:P:S>
Provides information about the specified device.
DNS LIST <D:P:S>
Displays the DNS configuration of a device.
DISK FREE
Displays the amount of free space on the disk.
ECHO ON|OFF
Enables/Disables echo of typed characters.
GET DEVICE HOLDOFF
Displays the state of the Master’s device holdoff setting.
GET DUET MEMORY
Display the amount of memory allocated for Duet Java pool. This is
the current Java memory heap size as measured in Megabytes. An
example is a value of 5 = 5 MB.
GET IP <D:P:S>
Displays the IP configuration of a device.
HELP SECURITY
Displays security related commands.
IP STATUS
Provides information about NetLinx IP Connections.
MEM
Shows size of the largest block of available memory.
MSG ON|OFF
Enables/Disables extended diagnostic messages.
OFF [D:P:S or NAME,CHAN]
Turns off the specified channel.
ON [D:P:S or NAME,CHAN]
Turns on the specified channel.
PASS [D:P:S or NAME]
Puts the Session in pass mode to the specified device.
• Mode is exited by ++ ESC ESC.
• Display Format is set by ++ ESC
n
- If
n
is
A
, format = ASCII,
D
, format = Decimal, and
H
= Hex
PING [ADDRESS]
Pings an address (IP or URL).
Specify -a option for reverse lookup.
PROGRAM INFO
Displays a list of program modules loaded.
PULSE [D:P:S or NAME,CHAN]
Pulses the specified channel.
REBOOT <D:P:S>
Reboots the device.
RELEASE DHCP
Releases the current DHCP lease.
ROUTE MODE DIRECT|NORMAL
Sets the Master-Master route mode.