![background image](http://html1.mh-extra.com/html/amx/fg2105-08/fg2105-08_operation-reference-manual_2937837035.webp)
Configuration and Firmware Update
29
NI-3101-SIG Signature Series NetLinx Integrated Controller
10.
Click
Reboot
from the
Tools > Reboot the Master Controller
dialog, and wait for the System
Master to reboot and retain the newly obtained DHCP Address.
The STATUS and OUTPUT LEDs
should begin to blink alternately during the incorporation. Wait until the STATUS LED is the only
LED blinking.
11.
Press
Done
once until the
Master Reboot Status
field reads *
Reboot of System Complete*
.
12.
Complete the communication process by continuing on to the
Communicating with the NI Device
via an IP
section on page 31.
Verify that these IP values are also entered into the related fields within either the
IP Settings section of the System Connection page (on the touch panel) or within the
Address field on the web browser.