![background image](http://html1.mh-extra.com/html/amx/axd-el-plus/axd-el-plus_instruction-manual_2939179028.webp)
Programming
24
Electroluminescent LCD Touch Panels
!
Border styles can be used to program borders on buttons, sliders, and gauges.
Shorthand Send_Commands
The table below lists the shorthand Send_Commands you can use with touch panels. The shorthand
command data is 1-byte, non-ASCII format except for pages, passwords, text, and bitmap names.
You must import variable text fonts into a TPDesign3 project file, and download the
project file containing the fonts to the touch panel. The variable fonts are
programming numbers assigned by the touch panel during the download process.
Border Styles and Programming Numbers
No.
Border styles
No.
Border styles
0
No border
11
Double shadow
1
No border special
20
3-dimensional rectangle 1
2
Single line
21
3-dimensional rectangle 2
3
Double line
22
3-dimensional round 1
4
Triple line
23
3-dimensional round 2
5
Single rounded
24
3-dimensional neon 1
6
Double rounded
25
3-dimensional neon 2
7
Single raised
26
3-dimensional neon blue
8
Double raised
27
3-dimensional neon green
9
Triple raised
40
Single diamond
10
Double-line two single
41
Double diamond
Colors other than yellow and black will not appear on the EL+.
Shorthand Send_Commands
@CBF
Sets the OFF
feedback border
color to the speci-
fied color.
This works only if the specified background color is not the same as the current color.
Syntax:
"’@CBF’,<variable text address>,<color_number>"
Variables:
variable text address = 1 - 255
color number = See the Colors and Programming Numbers table on page 23.
Example:
SEND_COMMAND TP,"’@CBF’,1,14"
Sets the OFF feedback border color to Yellow for the variable text button 1.
@CBN
Sets the ON feed-
back border color
to the specified
color.
This works only if the specified background color is not the same as the current color
.
Syntax:
"’@CBN’,<variable text address>,<color_number>
Variables:
variable text address = 1 - 255
color number = See the Colors and Programming Numbers table on page 23.
Example:
SEND_COMMAND TP,"’@CBN’,2,87"
Sets the ON feedback border color to Black for variable text button 2.