![background image](http://html1.mh-extra.com/html/amx/axd-el-plus/axd-el-plus_instruction-manual_2939179024.webp)
Programming
20
Electroluminescent LCD Touch Panels
System Send_Commands (Cont.)
BEEP
Gives an output of
one beep.
The Beep button in the Protected Setup page must be set from 1 - 10 for the BEEP com-
mand.
Syntax:
"’BEEP’"
Example:
SEND_COMMAND TP,"’BEEP’"
Beeps the panel if the Beep button is not set to 0.
CALIBRATE
Starts touch panel
calibration.
Syntax:
"’CALIBRATE’"
Example:
SEND_COMMAND TP,"’CALIBRATE’"
Starts the calibration operation on the touch panel.
CLOCK
Sets the time and
date.
Syntax:
"’CLOCK <mm-dd-yy> <hh:mm:ss>’"
Variables:
mm = 01 - 12, dd = 01 - 31, yy = 00 - 99
hh = 00 - 23, mm = 00 - 59, ss = 00 - 59
Example:
SEND_COMMAND TP,"’CLOCK 02-08-98 19:16:00’"
Sets the touch panel’s date to February 8, 1998, and time to 7:16 p.m.
DBEEP
Gives a double
beep output.
This command only works if the Double Beep value in the Protected Setup page is set to
ON.
Syntax:
"’DBEEP’"
Example:
SEND_COMMAND TP,"’DBEEP’"
Double beeps the panel.
MOUSE
Turns on the
Microsoft Serial
Mouse.
Syntax:
"’MOUSE’"
Example:
SEND_COMMAND TP,"’MOUSE’"
Activates the Microsoft Serial Mouse.
PAGE
Flips to page with
specified page
name.
Syntax:
"’PAGE-<page name>’"
Variables:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP, "’PAGE-MAIN PAGE’"
Flips the touch panel to the page named MAIN PAGE.
PKEYP
Displays aster-
isks (*) for keypad
entries.
Syntax:
"’PKEYP-<number string>’"
Variables:
number string = 0 - 9999
Example:
SEND_COMMAND TP, "’PKEYP-1988’"
Displays the touch panel keypad with **** instead of 1988.