![background image](http://html1.mh-extra.com/html/amx/axd-el-plus/axd-el-plus_instruction-manual_2939179025.webp)
Programming
21
Electroluminescent LCD Touch Panels
System Send_Commands (Cont.)
PPOF
Closes a specific
popup page.
Syntax:
"’PPOF-<page name>’"
Variables:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"’PPOF-Popup Page 1’"
Closes Popup Page 1.
PPON
Opens a specific
popup page.
Syntax:
"’PPON-<page name>’"
Variables:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"’PPON-Popup Page 1’"
Opens Popup Page 1.
QBEEP
Stops all beeps.
Syntax:
"’QBEEP’"
Example:
SEND_COMMAND TP,"’QBEEP’"
Stops
all
beeps.
RESET
Clears panel sta-
tus (same as
power up). Saved
data is not cleared.
Syntax:
"’RESET’"
Example:
SEND_COMMAND TP,"’RESET’"
Resets the touch panel.
$SC
Sends a serial port
send_command
within a panel, as
if sent from
Axcess.
Syntax:
"$SC <device offset>,"’<send_command>,<variable
text #>,<data>’""
Variables:
device offset = Device number
variable text # = The variable text number value on the touch panel.
Example:
$SC 1,"’@TXT’,2,’TEXT’"
The string is sends the command to put text on a button with a variable text value of 2. It is
crucial that all the correct ’ and " be used with no spaces after the commas.
Example:
$SC 1,"’SLEEP’"
Sets a touch panel to sleep.
SETUP
Goes to the Setup
page.
Syntax:
"’SETUP’"
Example:
SEND_COMMAND TP, "’SETUP’"
Flips the touch panel to the Setup page.
SLEEP
Forces the touch
panel to screen
saver mode.
Syntax:
"’SLEEP’"
Example:
SEND_COMMAND TP,"’SLEEP’"
Activates the screen saver mode.
$ST
Sets the power
time-out for
TiltScreen panels.
The command is followed by 1, 2, or 3 ASCII digits.
The entered number is not valid when there is no WAV-PK connected to the TiltScreen pan-
els. The command is sent to the WAV-PK, which then sends it to the panel.
Syntax:
"’$ST <number>’"
Variables:
number = 1 - 255 ASCII characters
Example:
SEND_COMMAND TP, "’$ST 31’"
The number entered is based on the minute increments available within the touch panel
such as 30, 60, 120 minutes. This number will be rounded down to match an increment.