![background image](http://html1.mh-extra.com/html/amx/axd-el-plus/axd-el-plus_instruction-manual_2939179008.webp)
Installation
4
Electroluminescent LCD Touch Panels
7.
Attach the data and power wiring to the touch panel.
8.
Test the connection by reconnecting the AXlink connector to the Central Controller and
optional RS-232 wiring to the source equipment. Before continuing, disconnect all connections
until panel installation is complete. Once attached to the Decor style faceplate, the security
screws can’t be replaced without removing the overlay.
9.
Fasten the touch panel and low-profile Back Box using the #6-32 machine screws supplied
with the enclosure panel.
10.
Place the faceplate onto the bezel. You can also secure the faceplate to the bezel using the four
Phillips flat-head security screws.
11.
Insert the engraved overlay back into the bezel.
12.
Remove the backing from the adhesive tape strips located on the front of the touch panel; press
the engraved overlay onto the faceplate.
13.
Reconnect the AXlink wiring to the Central Controller and RS-232 wiring (optional) to the
external RS-232 device. The touch panel beeps when you apply power.
Installing touch panels and a BB-TP1 Back Box (solid surface)
FIG. 2 shows a sample AXD-EL+/PB and BB-TP1 Back Box for solid surfaces.
The BB-TP1 can also be mounted to wood or metal studs using the pre-drilled stud mounting holes.
1.
Cut out the surface using the dimensions shown in FIG. 3.
2.
Carefully insert a flat-blade screwdriver into the release slot on the touch panel’s bezel and
remove the engraved overlay.
3.
Lay the touch panel facedown onto a soft cloth and remove the four screws from the low-
profile Back Box. Remove the Back Box and discard.
4.
Place the BB-TP1 into the cutout and mark the threaded insert positions as shown in FIG. 3.
5.
Remove the BB-TP1 and drill holes (A and B) for the panel (FIG. 3). Then, place #6-32
threaded inserts into the four holes marked 'B' in the cutout dimensions illustration.
FIG. 2
AXD-EL+/PB and BB-TP1 Back Box (solid surfaces)
Stud mounting holes
Engraved overlay
Knockout
BB-TP1 Back Box enclosure
Solid surface
mounting flanges
AXD-EL+/PB faceplate