Appendix B – Advanced Configuration: Modifying Virtual Matrices
56
Optima Instruction Manual
The information in the dialog boxes for the following section is based on the following scenario. A dual-
connector 20x20 standard video board in slots 3 and 4 is reconfigured to switch 10x10 Y/c by creating a
new VM 2 that switches 10 channels of “Y” and 10 channels of “c” using the previous “composite”
channels.
Note
:
For additional information on creating virtual matrices, see the XNConnect Help file. To access
the Help file topic for an open dialog box, press F1.
To create a new virtual matrix:
1.
From the Virtual Matrix menu, select Add Virtual Matrix.
The Assign Virtual Matrix Signals dialog box opens.
2.
Under the Supported System Signals list (use either tab), select the signals for the new VM
(to select multiple signals, hold the down the Control key) and click Assign Signal.
3.
Under Virtual Matrix Info, enter a number and a unique name. Click OK.
The Assign Signals to Matrices dialog box opens.
4.
From the Available Signals box, select the signal.
5.
If applicable – For a multi-enclosure system, from the Enclosure drop down list, select the correct
enclosure.
6.
From the Physical Matrix drop down list, select the matrix (see “The Physical Matrix” on page 55).
7.
Click Assign Matrix.
Enter a number and name
Check the signals
to be assigned
Click OK
Select the signal
Click Assign Signal
Click OK
Check the settings
Select signal
Select the physical matrix
Click Assign Matrix
Select enclosure
Summary of Contents for AutoPatch Optima AVS-OP-1616-110
