SD-SDI & HD-SDI Input/Output Boards
108
Optima Instruction Manual
SD-SDI Input/Output Boards Specifications
Applies to I/O boards FG1046-491 and FG1046-527.
Also applies to SD-SDI I/O boards contained in pre-configured systems.
* Untested for 177 Mbps and 540 Mbps bit rates.
HD-SDI Input/Output Boards Specifications
Applies to I/O board FG1046-590.
Also applies to HD-SDI I/O boards contained in pre-configured systems.
* Data not available for 177 Mbps and 540 Mbps bit rates.
** Data not available for SMPTE 372M dual link format (using two I/O boards wired in conjunction for routing dual
link HD-SDI signals).
AMX reserves the right to modify its products and their specifications without notice.
Specifications
Bit Rates
143 Mbps, 177 Mbps*, 270 Mbps, 360 Mbps, 540 Mbps*
Auto Data Rate Lock
Yes
Data Type
8 bit or 10 bit
Standard
Conforms to SMPTE 259M, SMPTE 344M
Input Level (max.)
0.8 Vpp,
±
10%
Input Impedance
75 ohms
Auto Cable Equalization
Up to 1148 ft. (350 m) of Belden 8281 or equivalent typical @ 270 Mbps
Output Level (max.)
0.8 Vpp,
±
10%
Output Impedance
75 ohms
Timing Jitter
<0.1 UI @ 360 Mbps
Alignment Jitter
<0.1 UI @ 360 Mbps
Rise and Fall Time
600 ps,
±
100 ps (20% to 80%)
CDR (Reclocking)
Yes
Connector Type
BNC
Specifications
Bit Rates
143 Mbps, 177 Mbps*, 270 Mbps, 360 Mbps, 540 Mbps*, 1.485 Gbps
Auto Data Rate Lock
Yes
Data Type
8 bit or 10 bit
Standard
Conforms to SMPTE 259M, SMPTE 292M, SMPTE 344M, SMPTE 372M**
Input Level (max.)
0.8 Vpp,
±
10%
Input Impedance
75 ohms
Auto Cable Equalization
Up to 328 ft. (100 m) of Belden 8281 or equivalent typical @ 1.485 Gbps
Up to 459 ft. (140 m) of Belden 1694A or equivalent typical @ 1.485 Gbps
Output Level (max.)
0.8 Vpp,
±
10%
Output Impedance
75 ohms
Timing Jitter
<0.1 UI @ 1.485 Gbps
Alignment Jitter
<0.1 UI @ 1.485 Gbps
CDR (Reclocking)
Yes
Connector Type
BNC
Summary of Contents for AutoPatch Optima AVS-OP-1616-110
