Overview & General Specifications
7
Optima Instruction Manual
Overview & General Specifications
Applicability Notice
The information in this manual applies to the following Optima pre-configured systems, custom
systems, input/output boards, and expansion boards:
Optima Pre-Configured Systems
All Optima pre-configured systems are numbered FGP46-xxxx-xxx (e.g., FGP46-0808-007).
Optima Custom Systems
All custom Optima systems contain one or more of the following enclosure models:
Optima Input/Output Boards
Input/Output Boards
A single enclosure can handle a combination of signals (such as analog audio, analog video, sync,
digital video, DVI, etc.) depending on the number and type of input/output (I/O) boards. Optima 2 RU
enclosures have four board slots while Optima 3 RU enclosures have six board slots. (A double board
fills two board slots and has two rows of connectors; see page 13.)
For information on the specific I/O boards in your system, including connector types, cabling/wiring
directions, and specifications, see the applicable board chapter in this manual (chapter title specifies the
board’s signal type).
The following tables provide configuration sizes and sales numbers for boards that are sold individually
for custom systems. Pre-configured systems will also contain boards from these tables. 500 MHz Video
I/O boards are not listed in the tables, since they are not sold individually. 500 MHz Video I/O boards are
available only in pre-configured (Slam Dunk) systems in several configuration sizes with or without
stereo audio (see page 101).
Enclosure Size & Sales #
3 RU
FG1046-10
2 RU
FG1046-13
Optima Video I/O Boards & Sales #
Signal
Configuration
Sales #
Standard Video
(BNC Connectors)
8x8
FG1046-440
16x16
FG1046-485
16x24
FG1046-545
20x4
FG1046-470
20x20
FG1046-413
24x4
FG1046-515
24x16
FG1046-431
36x4
FG1046-422
S-Video
(S-Video Connectors)
8x8
FG1046-446
16x16
FG1046-488
Y/c
(BNC Connectors)
8x8
FG1046-476
Summary of Contents for AutoPatch Optima AVS-OP-1616-110
