DXZC-AM and DXZC-AMC Manual
Security Edition
www.amulethotkey.com |
16
4.2 Rear panel
1
Network port.
The DXZC-AM and DXZC-AMC zero clients
have a socket that accepts an SFP module (not shown). SFP
modules are available separately from Amulet Hotkey; see
.
2
Network LEDs.
The network port has an upper and lower
network status LED:
Upper network status LED
Off
No network connection
Green
Network connection; no traffic
Green flash Network connection; traffic detected
Lower network status LED
Off
10 Mbit/s connection
Yellow
100 Mbit/s connection
Green
1 Gbit/s connection
3
Video output 1
. DisplayPort connector.
Video output 2
. DisplayPort connector.
By default, the On Screen Display (OSD) displays on
the monitor connected to video output 1. Alternatively, you
can specify video output 2 as the OSD default; you make this
configuration change in the OSD itself, in the Display
Topology screen.
4
Rear panel USB ports
. Use these ports to connect any USB
devices, including keyboard and mouse, if these are more
convenient than the front panel ports.
5
Feature connector
. Reserved for future use. Do not connect
devices to this socket unless instructed to do so by Amulet
Hotkey technical staff.
6
Audio socket
. Stereo line out or speaker output on
3.5mm jack.
7
Locking DC inlet
.
You must only use the approved PSU!
See
6
4
5
7
3
2
DXZC-AM rear panel
1
6
4
5
7
1
3
2
DXZC-AMC rear panel