Amulet Hotkey DXZC-AM, User Manual, Page: 15 / 25

www.amulethotkey.com | 15
4. DXZC-AM/DXZC-AMC zero client features
Amber flash Unit is starting up
Red flash Internal fault, or unrecognised or faulty
SFP module
Blue flash SFP fiber module; no network connection
Blue SFP fiber module; connected to network
Green flash SFP copper module; no network connection
Green SFP copper module; connected to network
7 POWER / MENU switch . Powers the unit on or off and
displays the On Screen Display (OSD) menu.
A short button press turns on the unit. When the unit is on:
●
A long button press turns off the unit
●
A short button press displays the OSD configuration
menu (see
section 2.9.3 ).
8 Smart card reader . On DXZC-AMC only .
The integral smart card reader supports CAC and SIPRNet
tokens, ISO 7816 and EMV 2000 Level 1, and is compatible
with 5V, 3V and 1.8V smart cards.
For an overview of smart card authentication, see section 6.4 .
4
DXZC-AM front panel
7 1 2 3 4 5 6
DXZC-AMC front panel
7 1 2 3 4 5 6
8
4.1 Front panel
1 Mic socket. Microphone input on 3.5mm jack.
2 Headset socket. Stereo headset (combined headphones and
microphone) input/output on 3.5mm jack.
When a microphone is plugged into the Mic socket, the
Headset socket switches to audio output only.
3 Keyboard USB port . Connect a keyboard or other USB device.
4 Mouse USB port . Connect a mouse or other USB device.
5 PCoIP LED . Shows the PCoIP link status. When the LED is:
Off No PCoIP link is established
Green blink PCoIP link is available but not in session
Green PCoIP session is active
6 DEVICE LED . Shows the power status of the unit:
Red Unit is in standby; cannot be woken
remotely (Wake-on-LAN not enabled)
Amber Unit is in standby; can be woken remotely
by Wake-on-LAN or USB activity