DXZC-AM and DXZC-AMC Manual
Security Edition
www.amulethotkey.com |
10
Instructions for using a connection broker to connect your zero
clients to hosts are available in the Teradici
PCoIP® Zero Client
and Host Administrator Guide
(available to download from the
Teradici support site).
Note:
For further information about using connection
brokers, contact Amulet Hotkey
. See
also Knowledge Base article ‘Can I use a connection broker
with PCoIP technology? (15134-24)’ on the Teradici
support site.
2.9 Zero client management tools
You can interact with PCoIP zero clients through various
management tools:
■
The PCoIP Management Console allows you to centrally
administer large numbers of PCoIP devices. You can organize
zero clients into groups, define configuration profiles, and
apply configuration profiles to groups.
■
The Administrative Web Interface (AWI) is a web application
that you can use to remotely configure individual zero clients
and PCoIP hosts.
■
The On Screen Display (OSD) runs directly on the zero client.
It allows you to configure and view information about the
local client.
Note:
For full details about these management tools, see
the Teradici PCoIP® Zero Client and Host Administrator
Guide (available to download from the Teradici website).
2.9.1 PCoIP Management Console
The PCoIP Management Console has a web interface that allows
you to manage multiple devices (PCoIP zero clients and hosts)
from a central console.
From the console, you can view the status and connection
information of all PCoIP devices. You can manage devices
individually or by group. For example, you can create device
groups based on location or department.
In particular, you can assign configuration profiles to PCoIP
devices and update device firmware (for the Teradici)
processor). You can also view device log files, reset devices, and
control the power state of devices.
PCoIP Management Console home page
Note:
The PCoIP Management Console plus supporting
documentation is available for download. For more
information on the PCoIP Management Console, please
contact Amulet Hotkey
.
2.9.2 Administrative Web Interface (AWI)
The AWI is an embedded HTTPS web interface for PCoIP devices.
It enables you to remotely configure individual PCoIP hosts and
zero clients using a web browser. For example, you can set
device power settings, connection speeds, and define initial
setup parameters. The AWI also provides tools for updating the
device firmware (for the Teradici processor).
To access the AWI, browse to the IP address of the PCoIP host or
zero client (see
).
AWI example screen