www.amulethotkey.com | Page 11
y
our
DXP4
2. Your DXP4
The DXP4 has various LEDs, sockets and jumper pins. These are
described in the sections that follow.
2.1
I/O bracket features
The I/O bracket for the DXP4 includes four LEDs, a network port,
a DisplayPort connector (Active Solution), and a recessed button.
See
for the following description:
1.
STATUS LED
: Shows the network type and status. See
for details.
2.
Int Fn LED
: Reserved for future use.
3.
Recessed button
: Insert a paper-clip into the hole to press
the recessed button. See
for details.
4.
DisplayPort connector
: Use this to connect a local monitor
directly to the host computer. See
for details.
5.
Network SPEED LED
: Indicates the network speed. See
for details.
6.
Network ACTIVITY LED
: In normal operation, this LED shows
network activity. It can also show progress for firmware
updates. See
for details.
7.
Network port
: The standard DXP4 has an RJ45 socket. The
DXP4-M has a socket that accepts an SFP module. See the
for details of modules available separately
from Amulet Hotkey.
1 2
3
5 6
7
4
DXP4-M: Active Thermal Solution
DXP4: Passive Thermal Solution
2
Figure 1:
Front panel features