manualshive.com logo in svg

Amulet Hotkey DXP4, User Manual

Share
Download
Amulet Hotkey DXP4 User Manual Download Page 34

Remote Workstation Graphics Card

Page 34

9.3 

Check the function of the Ethernet connection 

in an octal configuration

1. 

Connect the PC to mains power. 

Both DXP4s power up. 

2. 

Monitor the DXP4’s STATUS and INT FN LEDs. 

On both DXP4s the STATUS LED will flash GREEN to indicate 

activity.
On both DXP4s the INT FN LED will be ON and GREEN to show 

they are connected via the interlink cable.

3. 

Monitor the DXP4 ACTIVITY and SPEED LEDs.

For the DXP4 with Ethernet cable connected, the ACTIVITY 

LED is flashing and the SPEED LED is ON and AMBER (or 

GREEN).

ACTIVITY 

LED

INT FN 

LED

STATUS 

LED

SPEED 

LED

Figure 25: 

Status.LEDs.on.the.DXP4

4. 

Remove the external Ethernet connection and monitor the 

internal link LED.

The ACTIVITY and SPEED LEDs are off on both cards.

5. 

Connect the external Ethernet to the other DXP4 and 

monitor the LEDs on both DXP4s.

For the DXP4 with Ethernet cable connected, the ACTIVITY 

LED is flashing and the SPEED LED is ON and AMBER (or 

GREEN).
The ACTIVITY and SPEED LEDs are OFF on the other DXP4.

6. 

Remove the Ethernet connector, and re-connect to the first 

DXP4 card.

Summary of Contents for DXP4





































Reviews:

No comments

Brands by name

Popular brands

Load more brands