Install the DXP4
www.amulethotkey.com
| Page 17
3.6
STEP 6: Connect a zero client to the DXP4
1.
Install and power up a zero client.
If you are not sure how to do this, see the relevant Amulet
Hotkey user manual or Quick Start Guide for the zero client.
After powering up the zero client, you are ready to establish a
new PCoIP session.
The zero client connects to the DXP4 via the network port.
Note:
We recommend reading
first
if
you are not already familiar with the concept of PCoIP.
3.6.1 Connect to a DXP4 using SLP Discovery
Important!
This is one method you can use to quickly
connect your zero client to a host. For a detailed description
of all connection methods, see
If the zero clients and PCoIP hosts reside on the same subnet,
you can use the
Direct to Host + SLP session
connection type to
discover available PCoIP hosts on the subnet.
You must know the IP address (or MAC address) of the PCoIP
host that you want to connect to.
1.
Select the
Direct to Host + SLP Host Discovery
session
connection type from the drop down list.
Figure 9:
The.zero.client.OSD.discovers.and.lists.the.first.10.
available.PCoIP.hosts.discovered
2.
Select the host you want and click
OK
.
If the zero client successfully connects to the host, the front
panel PCoIP status LED illuminates green to indicate an active
session.
3.
(Optional) You can also set the
Enable Auto-Reconnect
in the
advanced settings to remember the last connected PCoIP host.
Note:
You must also configure a
Direct from Client
session
connection type on the host.
3.7
STEP 7: Change the default password
1.
For security, we recommend that you change the default
password for your DXP4 at the earliest possibility.
Important!
You must enter a password before changing
the configuration of host cards and zero clients. The factory
pre-set password for all Amulet Hotkey host cards and zero
clients is
ahkdante
.
3.8 Set up is complete
If you wish to read further about network considerations, refer
to
For any configuration or deployment issues refer to
or contact Technical Support
department (see contact details at the start of this manual).
