Amulet Hotkey DXP4, User Manual

Page: 12 / 36

Remote Workstation Graphics Card
Page 12
2.2 I/O bracket status LEDs
The status LEDs on the I/O bracket (see Figure 1 ) show the status
of the network connection including:
• the connection type and speed;
• the current network activity;
• the status of the PCoIP connection to a zero client.
There are four LEDs on the front panel:
• INT FN LED (not used);
• STATUS (link) LED;
• ACTIVITY (PCoIP) status LED;
• and the SPEED status LED.
See Figure 1 , Figure 2 and Figure 3 .
2.2.1 Key
The tables in this section use the following conventions:
• Color - LED is on steady;
• Flash - LED is on and off evenly;
• Blink - LED is on more than off;
• Wink - LED is off more than on.
2.2.2 STATUS LED
The host card has a STATUS (link) LED to indicate the type and
status of the network connection.
STATUS (link) LED
Figure 2: STATUS (link) LED
The STATUS LED displays the following indications.
LED status Meaning
Off No PCoIP link is established
Green wink
Copper network connection is detected (SFP
module or RJ45). Network link is not in session
Green
Copper network connection with link
established (SFP module or RJ45)
White flash BSM status indication. See
2.3
.
Red wink
Minor card error (for example cooling fan not
working).
Red flash Major card error
Red Power error
For SFP Modules only:
Green wink
SFP copper network connection is available but
not in session (or no SFP module inserted)
Blue wink
SFP fiber network connection is available but
not in session (or no SFP module inserted)
Blue
SFP fiber module detected; connected to
network
Green
SFP copper module detected; connected to
network
Cyan wink SFP module is not recognized
Table 1:
STATUS.PCoIP.LED.activity