AMT Datasouth AMT ACCEL-5350, User Manual

Page: 88 / 255

User's Guide
4-26 Control Panel
Turn Super/Subscript Modes
On and Off
SCRIPT lets you turn on and off the superscript and subscript modes.
In superscript mode, characters shrink to about half the normal size and
print above the print line. In subscript mode, the same small characters
print below the normal print line. You can select
Supr to turn the super-
script mode on; Sub to turn the subscript mode on; or Off to turn both
modes off.
Turn Underline Mode On and Off
UNDLINE lets you set the underline mode. In underline mode, all
characters and spaces are underlined. You can select
On or Off .
Turn Bold/Shadow Modes On and Off
BLD/SHA lets you turn on and off the bold and shadow modes. In bold
mode, characters are printed twice––one on top of the other––to produce
bold print. In shadow mode, characters are also printed twice––once and
then again slightly offset to the right––to produce shadow print. You can
select
Bld to turn the bold mode on; Sha to turn the shadow mode on; or
Off to turn both modes off.
21) SCRIPT: Off
22) UNDLINE: Off
23) BLD/SHA: Off
Turn Zero Slashing On and Off
SLASH-0 lets you turn zero slashing on and off. You can select Off to
specify that the numeral zero be printed without a slash ( 0 ); or On to
specify that the numeral zero be printed with a slash ( 0/ ). Your selection
affects the printing of the numeral zero in all fonts and print qualities.
24) SLASH-0: Off
User's Guide
4-26 Control Panel
Turn Super/Subscript Modes
On and Off
SCRIPT lets you turn on and off the superscript and subscript modes.
In superscript mode, characters shrink to about half the normal size and
print above the print line. In subscript mode, the same small characters
print below the normal print line. You can select
Supr to turn the super-
script mode on; Sub to turn the subscript mode on; or Off to turn both
modes off.
Turn Underline Mode On and Off
UNDLINE lets you set the underline mode. In underline mode, all
characters and spaces are underlined. You can select
On or Off .
Turn Bold/Shadow Modes On and Off
BLD/SHA lets you turn on and off the bold and shadow modes. In bold
mode, characters are printed twice––one on top of the other––to produce
bold print. In shadow mode, characters are also printed twice––once and
then again slightly offset to the right––to produce shadow print. You can
select
Bld to turn the bold mode on; Sha to turn the shadow mode on; or
Off to turn both modes off.
21) SCRIPT: Off
22) UNDLINE: Off
23) BLD/SHA: Off
Turn Zero Slashing On and Off
SLASH-0 lets you turn zero slashing on and off. You can select Off to
specify that the numeral zero be printed without a slash ( 0 ); or On to
specify that the numeral zero be printed with a slash ( 0/ ). Your selection
affects the printing of the numeral zero in all fonts and print qualities.
24) SLASH-0: Off