AMSAN AM-WB10810A, Manual

Page: 8 / 28

Keyboard(B)
1. Digital readout of “a”
，
distance dimension, inside amount of unbalance
2. Digital readout, the inside position of unbalance
3. Digital readout, the outside position of unbalance
4. Digital readout of “d”, diameter dimension, outside amount of unbalance
5. Indicator, computer board working
6. Digital readout of “b”, the width dimension
7. Indicator, dimension in mm or inch
8. Indicator, automatic gauge
9.
“ALU” correction mode selected, can choose following different modes:
Five balancing modes
Icon
Balancing
mode
Operation Add weights
Standard/Default
1. Turn on machine
2. Input a,b,d value
3. Start spin, after spin stop
Clip-on weights on
both sides of rim edge
ALU1
1. Turn on machine
2. Input a,b,d value
3. Press the ALU button, indicator lit up
4. Start spin, after spin stop
Add adhesive weights
on the rim shoulder
on both sides
ALU2
1. Turn on machine
2. Input a,b,d value
3. Press t h e ALU button, indicator lit
up
4. Start spin, after spin stop
Clip-on weight on
the inside rim edge,
add adhesive weight
on
outside rim shoulder
ALUS
1. Turn on machine
2. Press t h e ALU button, indicator lit
up
3. Input aI,aE,d value
4. Start spin, after spin stop
Add adhesive weights
on the two positions
gauge head touch