AMSAN AM-WB10810A, Manual

Page: 13 / 28

AM-WB10810A
Fig. 8
4.3.
ALU
－
S mode
This mode is used for the special rim, if ALU1/ALU2 can not be used, you should choose ALUS mode.
Input aI, aE, d value
⚫
Set “aI”: pull gauge outlet the gauge head touch the position of FI for 4 seconds, may press
and
to
change
⚫
Set “aE”: pull gauge outlet the gauge head touch the position of FE for 4 seconds
，
may press
and
to
change
⚫
Set “d”: read from rim, press
and
to input
⚫
Fig. 9
Put down the guard or press (when no hood) to perform a measuring spin.
4.3.1. 12 o’clock position to add weight
Set SLC as OFF according to 8.1
Anticlockwise moving wheel slowly, until the right LED lit up full, add weight on 12 o’clock position (Fig.10)
Fig. 10
Anticlockwise moving wheel slowly, until the left LED lit up full, add weight on 12 o’clock position (Fig.11)