AMSAN AM-WB10810A, Manual

Page: 10 / 28

Keyboard (B)
Icon Function Icon Function
Set distance Inch/mm change
Set rim width Optimization of unbalance
Set rim diameter Selection of “ALU” modes
Recalculation
Unbalance display pitch and
threshold
Static mode Start
Push-button,self-
diagnostics, self-calibration
Stop/Cancel
4. Indication and use of wheel balancer
4.1.
DYN (Standard/Default) mode
4.1.1. Clean wheel, take off counterweights, check t h e pressure of wheel. Choose the way of installation according
to the type of wheel.
Main shaft-wheel— Main shaft-suitable cone(big head towards inside)
suitable cone( small head towards inside)—quick handle nut
—wheel—quick handle nut
Attention
：
May add a wheel, and hold the wheel to help install the threaded hub. When installing or taking off the
wheel, do not let the wheel move on the shaft, to avoid scratching the shaft .
4.1.2. Turn on machine
4.1.3. Input a b d value
Turn on t h e machine, choose t h e right way to install t h e wheel according to the type of wheel. Set
“a” “b” “d” values:
●
set “a” value
：
move the gauge to measure position as illustrated as Fig.1, hold the gauge still in
position for approx. 4 seconds, successful memorization is given, then return the gauge to position