AMSAN AM-WB10810A, Manual

Page: 14 / 28

Fig. 11
After finishing mounting the counterweights, put down the guard and press
，
to perform balancing spin
again, if comes out 00 00
，
means balancing succeed. (Fig.12)
Fig. 12
4.3.2. Use gauge head to add weight
Set SLC as ON according to 8.1
Fig. 13
Anticlockwise moving wheel slowly, until the right LED lit up full (Fig.14)
Fig. 14
Take off proper counterweight to be held by the gauge head as Fig. 16
Fig. 15 Fig. 16
Pull out gauge until there is a square comes in the middle window (Fig. 17)