AMSAN AM-WB10810A, Manual

Page: 18 / 28

6. Errors
Various abnormal conditions can arise during machined operation by the microprocessor, if any errors pop up then you
must stop operation, find the reason and the solution according, if the error persists, consult the supplier.
No. Errors Reasons Solution
1
1
．
No spin 2
．
Shaft spin
1
．
If no spin, check or change power
board
2.
If spin, check or change position pick
up board and computer board
3.
Adjust position pick up board support
2
1
．
No wheel or wheel not
locked tightly
2
．
Position pick up board
problem
1.
Lock tightly
2.
Check or change position pick up
board
3
1
．
No enough pressure in
wheel
2
．
Wheel distortion
1
．
Add proper pressure in wheel
2
．
Check wheel
4
1. Position pick up board
problem
2. Computer board problem
1.
Check or change position pick up
board
2.
Check or change computer board
5
1. Micro switch problem
2. Computer board problem
1.Check or change Micro switch
2.Check or change computer board
6
1. Power board problem
2. Computer board problem
1.Check or change power board
2.Check or change computer board
7
1. Program lost
2. Computer board problem
1.
Self calibration
2.
Check or change computer board
8
1. No add 100g weight
during self calibration 2
．
Computer board problem
3
．
Power board problem
1. Add 100g weight
2. Check or change computer board
3.Check or change power board
9
1.
Micro switch problem
2.
Computer board problem
1.Check or change micro switch
2.Check or change computer board
10
1
．
Computer board problem
2
．
Power board problem
1.Check or change computer board
2.Check or change Power board
11
1
．
Problem of gauge
2
．
Problem of distance
potentiometer
1.
Do self-calibration of gauge
2.
Change distance potentiometer and
do self-calibration of distance gauge