CHAPTER C - REPLACEABLE ITEMS,
OPTIONS AND ACCESSORIES
C-1. Available Accessories and Options
This manual does not list all possible
accessories that AMPTEC RESEARCH is
willing to provide as a support items for the
630ES Explosive Safety Meter Igniter Tester.
Contact the sales department at AMPTEC if you
have a request for an item that is not described
here. Listed below are the options available for
use with the AMPTEC 630ES Explosive Safety
Meter Igniter Tester.
Option 630-BAT: Replacement Battery Pack
The rechargeable NICAD battery pack
installed in the 630ES Explosive Safety Meter
should provide trouble-free operation.
Replacement, however, may eventually be
necessary. The 630ES Explosive Safety Meter
battery pack uses four "D cell" - 1.2V (5.0 AHr
NICAD recommended) installed in a
rechargeable battery pack.
C-2. 630ES Test Lead and Connector Sets
All AMPTEC Explosive Safety - Igniter Tester /
Failsafe Ohmmeter Test Leads and Probe sets
are a minimum 48" length. One end of the test
lead set is terminated with the mating connector
for 630ES
Front panel connection port (user
specified). AMPTEC RESEARCH's website
http://www.amptec.com
should also provide the
latest information on accessories available.
Option 630-300 : A 4 Terminal Kelvin Clip
Lead Set (
630ES compatible
)
The option "630-300" is a shielded 48" lead set
terminating in ½" opening Gold Plated 4
Terminal Kelvin clips that is AMPTEC 630ES
compatible. The option "630-300" can clip
easily to wires, pins, and medium size (up to ½"
diameter) conductors. Option "630-300" is the
recommended Kelvin Clip four wire lead set for
the 630ES Series Igniter Testers. The notched
connector end plugs directly into the 630ES’s J1
main front panel connector labeled for “test
leads”.
(photo shows AMPTEC
630ES battery pack)
The reliability of the 630ES battery pack is
estimated to be ten fold better than individual
batteries simply placed in the battery holder.
AMPTEC RESEARCH does not recommend
using individual NICAD batteries in lieu of the
AMPTEC 630ES battery pack, and as such
would be deemed a violation of product
warranty. To order a replacement
AMPTEC630ES Explosive Safety Meter
NICAD battery pack specify AMPTEC part
number "OP630-BAT".
