plug terminations connect directly to the 601ES
DMM’s front panel input terminals.
Option "305" is a 48" shielded cable terminated
in dual banana plugs at both ends.
Option "320" are the gold plated Kelvin Clips
used on the Option "300" cable set. These clips
may be used when making custom cables or
when repairing Option "300".
Option "360" are Gold-plated jumper cable
(large jaws) type clips used on the Option "350"
cable. They are still Kelvin Clips because the
Option "290" is the recommended general
purpose Alligator Clip lead set (red and black).
Option “290" is recommended as a standard 2
wire test lead set for use with the AMPTEC
601ES Safety DMM. Option “290" is a 48"
long cable set with dual banana plugs at one
end. The other end is terminated with an
alligator clip (red and black). These alligator
clips will measure (2 wire method) properly
with either upper or lower jaw connected to the
conductive socket center of plastic test panel
jacks. Kelvin Clips such as Option “300” (using
the 4 wire method) may have connection
difficulty because both jaws (both upper and
lower) must make electrical contact with the
EED.
Option “290" Alligator Clip Lead Set
Option 305: Banana-to-Banana Cable
Option 320: Kelvin Clips
Option 360: Heavy-Duty Clips
(See photo on
previous page)
insulated upper and lower jaw integrity is main-
tained. These may be used when making custom
cables or when repairing Option "350".
For more information on accessories, please
refer to the accessories section of AMPTEC
RESEARCH’s website found at
“http://www.amptec.com”.
Sect. C - Replacement, Optional and Accessories Items
9
