C-1. Available Accessories and Options
This manual does not list all possible
accessories that AMPTEC RESEARCH is
willing to provide as a support items for the
AMPTEC 601ES DMM. Contact the sales
department at AMPTEC RESEARCH if you
have a request for an item that is not described
here. Listed below are some of the options
available for use with the AMPTEC 601ES
Explosive Safety DMM.
Option 401: Gold Plated Single Probe Leads
Option "401" is a
handheld probe
(one black probe & one red probe) lead set ter-
minated in
. The OP401 handheld
probes allow for easy access to connector socket
wiring (i.e. drone parachute squib sockets),
recessed surfaces and parts (i.e. flares) that alli-
gator clip leads simply can’t access properly.
Option "401" plated a 4-wire lead set (up to the
probe tip, 2 and 2 style) is terminated with sin-
gle
handheld probe test points. The
“401” also has
dual banana leads
that connect directly to the AMPTEC 601ES
DMM measurement front panel jacks (red and
white). 4-wire Kelvin is maintained up to the
point of the probe tip connection, eliminating
98% of the cable resistance. Gold plated tips
and banana jack ends provide an optimal low
thermal emf connection.
gold plated
single points
gold plated
gold plated
Kelvin Leads, Probes Accessories and
Options
All AMPTEC series test lead and probe sets are
a minimum 48" length, dual banana
termination at the ohmmeter end (call the
Sales Department at AMPTEC RESEARCH
for any custom requirement)
.
Option 403 4 Terminal Kelvin Mini-probes
:
with 0.18" separation, one red and one
black handheld probe. Excellent general purpose
4-Wire Kelvin Mini-Probe, and along with the
Option "300" Kelvin Clip Leads easily fit inside
the AMPTEC test lead pouch.
Each probe has two spring loaded, gold plated,
steel tips
Option 300: 4-Wire Kelvin Lead Set
Recommended for Calibration - Option "300" is a
four wire Kelvin lead set for all
AMPTEC 601ES DMM. Option 300 is a shielded
48" lead set terminating in ½" opening gold plated
copper Kelvin clips. The option "300" can clip
easily to wires, pins and medium size conductors
(up to ½" diameter). The dual banana
gold plated
Option “300”
Close-Up
Option "300"
4-Wire Kelvin Clip Test Lead Set
(Gold Plated)
SECTION C - REPLACEMENT, OPTIONAL
AND ACCESSORY ITEMS
8
