Chapter 2
Installing ReadyBoard 800 Options
ReadyBoard 800
QuickStart Guide
23
CAUTION
To prevent damage to the ReadyBoard 800 or the MiniModule ISA
board, do not touch either one until you have discharged yourself and
have followed good Electrostatic Discharge principals. The ReadyBoard
800 card is sensitive to static electricity and can be easily damaged by
improper handling. Do the following when handling either one:
Always use an anti-static wrist/ankle strap and a grounding mat
connected to ground.
Before handling the MiniModule ISA board or removing it from its anti-
static container, touch a grounded, unpainted metal surface to discharge
any static electricity.
3. Disconnect any cables that would prevent you from accessing the four PC/104 mounting post
locations and the PCI-104 connector on the ReadyBoard 800.
4. Mount the four 0.8" (20 mm) standoffs onto the ReadyBoard 800 at the four PC/104 mounting
holes on the board. See Figure 2-7.
R
B
80
0Q
kS
_MM
IS
A
01a
0.6”/15mm
Standoffs (4)
for next board
or 4 screws
0.8”/20mm Standoffs (4)
MiniModule ISA
ReadyBoard 800
3M P0.5 Screws (4)
Figure 2-7. Installing the MiniModule ISA Expansion Board
5. Position the MiniModule ISA board over the PCI-104 connector on the ReadyBoard 800.
Match the connector on the bottom of the MiniModule ISA board with the PCI-104 connector on
the ReadyBoard 800, as shown in Figure 2-7.
