Ampetronic d series, Installation And User Manual

Page: 39 / 48

Ampetronic D Series Installation Handbook & User Guide
Page 37
16. TECHNICAL SPECIFICATIONS to IEC 62489-1 Standard
Inputs
Power: 50/160/80W 230V AC nominal, 45-65Hz [120V option available]
Power switch on front panel
Input 1 & 2 XLR balanced input with programmable
Programmable microphone and line via panel menu
Microphone / Line: Microphone specification; 200 - 600Ω, sensitivity -64dBu.
Selectable 12V phantom power on microphone only
Line sensitivity; -39dBu
Slave In: 6.35mm jack socket for linking more than one amplifier.
Inserting plug disables other inputs
Network audio control (optional)
Outputs
Loop Output Drive Voltage:
33.9Vrms (48Vpk) at maximum output current per channel
Loop Output Drive Current:
D7-X
7Arms (10Apk) up to 60 seconds continuous 1kHz sine
wave, peak >10A per channel
Cont . pink noise 3 .3Arms short term peaks >10A per ch .
D10-X
10Arms (14.1Apk) up to 60 seconds continuous 1kHz
sine wave, peak >14 .1A per channel
Cont . pink noise 4 .7Arms short term peaks >14 .1A per ch .
D14-X
14Arms (19.8Apk) up to 60 seconds continuous 1kHz sine
wave, peak >19 .8A per channel
Cont . pink noise 6 .6Arms short term peaks >20A per ch .
Level controlled via front panel menu or network
Drive current indicated on two 4-LED displays in 6dB
increments
Slave Out: 6.35mm jack socket to connect to other slave amplifiers
Loop Connectors: Neutrik NL2 Speakons (supplied) for each output
Loop Monitor: Provides access to monitor actual loop current via a
3 .5mm stereo headphone connector on front panel
Channel A on left, channel B on right
DC Output: Resettable, fuse protected 12V 0.1A. Operation can be
configured via menu.
Audio System
Frequency Response: 80Hz to 6 .5kHz
Distortion: THD+N <0 .2% 1kHz sine at full current
Automatic Gain Control: The AGC is optimised for speech . Dynamic range >36dB