Ampetronic d series, Installation And User Manual

Page: 12 / 48

Ampetronic D Series Installation Handbook & User Guide
Page 10
7. FRONT PANEL MENU GUIDE
N.B. The front panel menu utilises capacitive touch technology. These need only the
proximity of the users finger to operate, as a smart phone screen would be used. These are
not buttons and do not need to be pressed.
The front panel has 7 touch buttons that are used to navigate the menu system of the D-Series
driver . These buttons are listed below together with a summary of their main functions:
MENU
Selects the menu system to use “MAIN”, “QUICK” or “STATUS”
Selects the items within a level of the menu – decrements index
Additionally for the main menu only, selects the digit changed by the INCREASE and
DECREASE buttons when editing numerical values
Selects the items within a level of the menu – increments index
Additionally for the main menu only, selects the digit changed by the INCREASE and
DECREASE buttons when editing numerical values
Enters the next level down of the menu
Move back up the menu structure .
Panel lock: When in Home screen select this 6 times within 5 seconds to lock/unlock
the menu .
Adds to numerical values or moves up a list of values
Subtracts from a numerical value or moves down a list of values
Each button except the MENU button has a blue LED within the button perimeter . If this button has
a function in the current menu then the LED will be illuminated . When a button is touched, the LED
will change state – if it was on it will turn off and if it was off it will turn on . Note that the button press
is registered when the finger is removed from the button.
Menu Selection
The menu button selects between the three available menus “MAIN”, “QUICK” and “STATUS” –
each press of the menu button will change the currently active menu . The new active menu is
displayed on the LCD display for 2 seconds and the LED next to the active menu is lit . The three
menus operate slightly differently and are optimised for different tasks .
9.0
4.5
2.3
1.2
CURRENT (A pk)
CLIP
CH B
CH A
36
28
20
12
AGC (dB)
ERROR
QUICK
MAIN
STATUS
2.1 Current
Current =-52.0dB
MENU
M U L T I L O O P D R I V E R
D SERIES
NETWORKED DUAL 14A DSP
Induction Loop Driver
~ 230V
45 - 65Hz
Power: 85W
Fuse: T 3.15A L
Designed and Engineered in the UK
D14-2
LOOP O/P CONNECTIONS
1-
2-
1+
2+
www.ampetronic.co
CHANNEL A
LOOP OUTPUT
0.1A
+12V
DC OUTPUT
Serial No.
CHANNEL B
LOOP OUTPUT
USB
(UPDATE ONLY)
ETHERNET SLAVE IN SLAVE OUT
AC POWER INPUT
INPUT 2
MIC / LINE / AES
INPUT 1
MIC / LINE
Menu Selection Menu Navigation Value Selection