4G PoE IIoT Gateway
WDS Only Mode
For the WDS Only mode, the device only bridges the connected wired clients to another WDS-enabled WiFi
device which the device associated with. That is, it also means the no wireless clients stat can connect to this
device while WDS Only Mode is selected.
WDS Only Mode
Item
Value setting
Description
Green AP
The box is
unchecked by
default.
Check the
Enable
box to activate
Green AP
function.
Time Schedule
A Must filled
setting
Apply a specific
Time Schedule
to this rule; otherwise leave it as
(0) Always
.
If the dropdown list is empty ensure
Time Schedule
is pre-configured. Refer to
Object
Definition
>
Scheduling > Configuration
tab.
Scan Remote AP’s
MAC List
N/A
Press the
Scan
button to scan the spatial AP information, and then select one from
the AP list, the MAC of selected AP will be auto filled in the following Remote AP
MAC table.
Remote AP MAC 1~4
A Must filled
setting
Enter the remote AP’s MAC manually, or via auto-scan approach, The device will
bridge the traffic to the remote AP when associated successfully.
By default, VAP 1 is enabled and security key is required to connect to the gateway wirelessly to enhance the
security level and prevent unexpected access of un-authorized devices.
The default wifi key is printed on both the device label and the Security Card. It is created randomly and
differs from devices. So, you can connected to the VAP1 (SSID: Staff_2.4G) with the provided key.
However, it is strongly recommanded that you have to change the security key to a easy-to-remember one
by clicking the Edit button
.
94