4G PoE IIoT Gateway
By Less Interference
The channel will be selected according to interference. (The lower, the better).
WiFi System
A Must filled setting
Specify the preferred WiFi System. The dropdown list of
WiFi system
is based on
IEEE 802.11
standard.
2.4G WiFi
can select b, g and n only or mixed with each other.
5G WiFi
can select a, n and ac only or mixed with each other.
WiFi Operation
Mode
Specify the
WiFi Operation Mode
according to your application.
Go to the following table for
AP Router Mode
,
WDS Only Mode
, and
WDS Hybrid
Mode
settings.
Note: The available operation modes depend on the product specification.
In the following, the specific configuration description for each WiFi operation mode is given.
AP Router Mode & VAPs Configuration
For the AP Router mode, the device not only supports
stations connection
but also the
router function
. The
WAN
port and the
NAT
function are
enabled
.
AP Router Mode
Item
Value setting
Description
Green AP
The box is unchecked
by default.
Check the
Enable
box to activate
Green AP
function.
VAP Isolation
The box is checked by
default.
Check the
Enable
box to activate this function.
By default, the box is checked; it means that stations which associated to different
VAPs cannot communicate with each other.
Time Schedule
A Must filled setting
Apply a specific
Time Schedule
to this rule; otherwise leave it as
(0) Always
.
If the dropdown list is empty ensure
Time Schedule
is pre-configured. Refer to
Object
Definition
>
Scheduling > Configuration
tab.
By default, VAP 1 is enabled and security key is required to connect to the gateway wirelessly to enhance the
security level and prevent unexpected access of un-authorized devices.
The default wifi key is printed on both the device label and the Security Card. It is created randomly and
differs from devices. So, you can connected to the VAP1 (SSID: Staff_2.4G) with the provided key.
However, it is strongly recommanded that you have to change the security key to a easy-to-remember one
90