www.amico.com
35
Installing in Light Camera (Optional Accessory)
1. Connect the Lemo Connector to the camera.
2. Install camera on light.
3. In order to remove the camera press the two release buttons highlighted by the arrows above.
4. To disconnect the connection, pull on the connector jacket only.
NOTE:
Do not pull on cable.
Connecting the Camera Controller Box
1. Insert the 15-Pin VGA Cable into the Camera Controller Box’s Input.
2. Connect the Output of the Camera Controller Box to the monitor’s Input.
Installation: Amico iCE LED Light
PROJECT MANAGER : ___________________
ENGINEERING : __________________________
PRODUCTION : __________________________
REV.
DESCRIPTION
BY
DATE
5
4
3
1
55 East Wilmot St.
Richmond Hill, Ontario
L4B 1A4, CANADA
Tel: (905)764-0800
Fax: (905)764-0862
DESCRIPTION:
PART NO:
SHEET:
OF
DRAWING NO:
1
1
PROJECTION
PRIVATE AND CONFIDENTIAL
THIS PRINT IS PROPERTY OF AMICO CLINICAL AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN UPON
REQUEST AND WITH THE UNDERSTANDING THAT NO COPIES ARE TO BE MADE WITHOUT THE CONSENT OF
AMICO CLINICAL.
ALL RIGHTS TO DESIGN OR INVENTION ARE RESERVED
DATE:
DATE:
CHECKED BY:
DRAWN BY:
NTS
SCALE:
2
A
B
C
D
FINISH:
MATERIAL:
140919-RK01
UNLESS SPECIFIED:
ALL DIMENSIONS IN INCHES
SURFACE FINISH 63 uin
BREAK ALL EDGES 0.005 - 0.010
REMOVE SHARP EDGES AND BURRS
ANGLE TOLERANCES 1
DECIMAL TOLERANCES:
X .XX .05
X.XXX .005
X.XXXX .0005
CAMERA CONTROL BOX
Ethernet Connectivity for
Video Integration
External Input Source: Y/Pb/Pr
Video Output to
Monitor: Y/Pb/Pr
VGA – Camera Input
Camera Programming
Connector
Jacket
Release
Button
Release
Button
