www.amico.com
29
Installation: Amico iCE 30m LED Light
Regular Spring arms Only
1. Insert the cotter holder onto the front weld tube with the
cutout closer to the ground.
2. Monitor Spring Arms will have a ring stop inserted into the
bottom of the front weld tube with the extruding tooth
facing downwards.
3. While keeping the assembly straight, insert the end of the
yoke upwards into the front weld tube. Use a cotter pin to
secure the yoke in place.
4. Turn the cotter holder 180° and screw in the cotter holder
cover using an M3 screw.
Installing the iCE 30m Lighthead
