Preface
PLEASE READ CAREFULLY
Thank you for your purchase with Amico Accessories Inc.
The Amico Roll Stand is designed for long lasting performance, provided the user complies with assembly and
maintenance procedures. This instruction manual is your guide to ensuring that you get the best performance out your
equipment. Amico Accessories is not responsible for any damage as a result of (but not limited to) abuse and other
malfunctions that may be a direct or indirect result of failure to comply with the instructions provided in this manual.
Precautionary Symbols You Will Find in This Manual
WARNING
Steps where extra care should be taken to prevent injuries and damage.
NOTE
Steps that point out helpful information.
Responsibility of Medical Facilities
Preventive maintenance checks must be performed regularly to maintain the quality and performance of this product.
Any parts that may be broken, missing, worn, distorted or contaminated in any way should not be used and all affected
parts should be replaced immediately. Should the necessity of any repair be suspected; please contact your local
Amico distributor.
PRECAUTIONS
WARNING:
IT IS THE INSTALLER’S RESPONSIBILITY TO ENSURE ALL COMPONENTS ARE PROPERLY ASSEMBLED AND
INSTALLED USING THE PROVIDED INSTRUCTION MANUAL.
WARNING:
EXCEEDING WEIGHT CAPACITIES CAN RESULT IN SEVERE PERSONAL INJURY OR DAMAGE TO YOUR
EQUIPMENT. IT IS THE INSTALLER’S RESPONSIBILITY TO ENSURE THE COMBINED WEIGHT OF ALL
COMPONENTS DOES NOT EXCEED THE WEIGHT CAPACITY LISTED IN PRODUCT CLASSIFICATION ON
PAGE 3 AND 4 OF THIS MANUAL.
WARNING:
DO NOT PLACE ROLL STAND ON AN INCLINE GREATER THAN 10 DEGREES OR UNIT MAY TIP.
WARNING:
ALWAYS USE LOCKS ON CASTERS WHEN EQUIPMENT IS NOT IN USE TO PREVENT UNWANTED
MOVEMENT.
