background image

     www.amico.com     

18

 www.amico.com

 www.amico.com

Amico Accessories Inc. warrants all mounting accessories to be free from defects in material and workmanship for a period of 
twelve (12) months from the date of shipment. Within this period Amico Accessories Inc. will repair or replace any part which is 
proven to be defective.

Amico Accessories Inc. will warrant its materials to be free from defect for an additional period of four (4) years, (five [5] years from 
the date of shipment). Within this period, Amico Accessories Inc. will replace any part which is proven to be defective, at no charge. 
Shipping and Installation costs after the first twelve (12) months will be borne by the Customer.

This warranty is valid only when the product has been properly installed according to Amico Accessories Inc. specifications, used 
in a normal manner and serviced according to factory recommendations. It does not cover products that are not manufactured by 
Amico Accessories Inc. It does not cover failures due to damage which occurs in shipments or failures which result from accidents, 
misuse, abuse, neglect, mishandling, alteration, misapplication or damage that may be attributable to acts of God.

Amico Accessories Inc. shall not be liable for incidental or consequential damages resulting from use of equipment.

All claims for warranty must first be approved by Amico Accessories Inc. A valid Return Goods Authorization (RGA) number must 
be obtained from Amico Accessories Inc. prior to commencement of any service work. Warranty work, which has not been pre-
authorized by Amico Accessories Inc., will not be reimbursed. 

AMICO ACCESSORIES INC. DOES NOT HONOR VERBAL STATEMENTS CONCERNING THE WARRANTY.

The distributor and/or dealer are not sanctioned to create verbal warranties about the product described in this agreement. Any 
statements will not be honored or be made part of the agreement of sale. This document is the final complete and exclusive terms 
of the agreement. 

THIS WARRANTY IS INCLUSIVE AND REPLACES ALL OTHER WARRANTIES.

Amico Accessories Inc. shall not, under any circumstances be liable for incidental or consequential damages including, but not 
limited to, profit, loss of sales or injuries to person(s) or property. Correction of noncompliance as noted above will result in 
completion of all liabilities of Amico Accessories Inc., whether based on agreement, neglect or changed materials, designs or 
specifications without notice.

All claims for warranty must first be approved by Amico Accessories Inc. Service Department: [email protected] or 
1.877.264.2697. A valid Return Goods Authorization number must be obtained from Amico Accessories Inc. prior to commencement 
of any warranty claim.

Amico Accessories Inc. 85 Fulton Way, Richmond Hill, ON L4B 2N4, Canada

Tel: 905.763.7778 | Fax: 905.763.8587 

Warranty Policy - Equipment Mounting Solutions

AA-WARRANTY   08.16.2017

Gooseneck Roll Stand

Summary of Contents for Gooseneck





















Reviews: