Amico AG series, Owner'S Manual

Page: 12 / 44

1.2 ASSEMBLY
The generator requires some assembly prior to using it ,if
problems arise when assembling the generator, please call the
AMICO Generator Help Line at 1-888-545-7788.
1.2.1 ASSEMBLING THE ACCESSORY KIT
The wheels are designed to the unit to greatly improve the
portability of the generator.
The wheels are not intended for over-the-road-use.
1. Refer to figure 1 to install the wheels as shown.
*slide the axle through the frame brackets.
*slide on the hub, wheel and flat washer, then insert the cotter
pin through the wheel axle hole.
2. Refer to figure 1 to install the wheel bumpers as shown.
*Insert an M6 bolt through the frame brackets.
*Slide on the hub, wheel and flat washer, and then insert the
cotter pin through the wheel axle hole.
*Bend the cotter pin tabs outward to lock the pin in place.
3. Refer to figure 2 to install the handle assembly as shown.
*Insert the handle bracket onto the generator frame and
secure with two M6 bolts and to M6 flange nuts.
*Align the handle assembly holes with the handle bracket
holes and secure with one M6 bolt and one M6 flange nut.
Figure 1- Wheel Assembly
9
4. Refer to figure 1 to install the battery as shown.
Axle
Gasket
B type pin
Flange bolt
Battery support
Battery
Butterfly nut
Flange nut
Flange bolt
Handle pipe
Handle plastic nut
Flange bolt
Flange nut
Support
Rubber pad
Stud nut