found on a data label or decal affixed to the device.
*If the appliance, tool or motor does not give wattage, multiply
volts times ampere rating to determine watts (volts x amps =
watts).
*Some electric motors, such as induction types, require about
three times more watts of power for starting than for running.
This surge of power lasts only a few seconds when starting such
motors. Make sure to allow for high starting wattage when
selecting electrical devices to connect to the generator.
1. Figure the watts needed to start the largest motor.
2. Add to that figure the running watts of all other connected
loads.
The wattage reference guide is provided to assist in determining
how many items the generator can operate at one time.
All figures are approximate. See data label
on appliance for wattage requirements.
2.5 WATTAGE REFERENCE GUIDE
Device…………………………………………………..running watts
*Air conditioner (12,000 Btu)…………………………………...1700
*Air conditioner (24,000 Btu)…………………………………...3800
*Air conditioner (40,000 Btu)……………………………………6000
Battery charger (20 Amp)………………………………………...500
Belt sander (3”)……………………………...…………………...1000
Chain saw………………………………………………………..1200
Circular saw (6-1/2”)………………………………………800to1000
*Clothes dryer (electric)…………………………………………5750
*Clothes dryer (gas)……………………………………………….700
*Clothes washer………………………………………………….1150
Coffee maker……………………………………………………..1750
*Compressor
(
1hp
)
……….…...…...…………...……………..2000
*Compressor (3/4hp)…………………………………….………1800
*Compressor (1/2hp)………………………………….…………1400
Curling iron………………………………………………………..700
*Dehumidifier……………………………………………………...650
Disc sander (9”)………………………………………………….1200
Edge trimmer……………………………………………………...500
Electric blanket……………………………………………………400
14
14
Summary of Contents for AG series
