Figure 2-Handle Kit
2.1 KNOW THE GENERATOR
Read the owner’s manual and safely rules before operating
this generator.
Compare the generator to figures 3 through 5 to become
familiarized with the locations of various controls and adjustments.
Save this manual for future reference.
1. 120 Volt AC,20 amp, duplex receptacle-supplies electrical
power for the operation of 120 volt AC.20 amp, single-phase,
60hz electrical lighting, appliance, tool and motor loads.
2. 240 Volt AC,30 amp, twist lock receptacle- supplies electrical
power for the operation of 240 volt AC.30 amp, single-phase,
60hz electrical lighting, appliance, tool and motor loads.
3. Circuit breakers (AC) – each receptacle is provided with a
push-to-reset circuit breaker to protect the generator against
electrical overload.
4. Air filter- filters intake air as it is drawn into the engine.
5. Choke knob-used when starting a cold engine.
6. Fuel tank- tank holds 6.42 U.S gallons of fuel.
7. Grounding lug – ground the generator to an approved earth
ground here. See “Grounding the generator” for details.
8. ON/OFF key switch- controls the operation of the generator.
9. Muffler-quiets the engine.
10. Handle-pivot and retract for storage.
11. Gas cap- fuel fill location.
12. Fuel gauge- shows fuel level in tank.
10
Summary of Contents for AG series
