amiad AMF-36K, Installation And Operation Instructions Manual, Page: 48 / 71

AMF² 36K + HMI 08.2013 Page 48 of 71
Valves 2 Screen
This screen allows the operator to set the:
Inlet Valve Opening Delay – Set the delay for opening the inlet
valve of the filter. (Default value - 10 seconds.)
Filtering to Waste Duration – Set the required time for the
“filtering to waste” stage (V7). (Default value - 55 seconds.)
Filtering to Waste Closing Delay – Set the required time for
closing the “filtering to waste” Valve (V7). (Default value - 10
seconds.)
Outlet Valve Opening Delay – Set the delay for opening the
outlet valve of the filter. (Default value - 10 seconds.)
Delay between Filters - Set the delay in 10 seconds units
between the ends of the flush cycle of one unit to the start of the
cycle of the next unit. (Default value 1 X 10 seconds.) Not
applicable in a single filter installation.
Operations Screen
This screen allows the operator to:
Step by Step – Start a “Step by Step” back-flush process of the
AMF² filter.
This is a necessary part of the first startup operation of the filter
during its installation process.
AMF Cycles for M303 Flushing – N/A in a single AMF² 36 filter
M303 Flush Counter - N/A in a single AMF² 36 filter
Filter Operation – Enable / Disable the filter operation. Usually
used in multi-filters installation.
Restore Factory Defaults - Use this option to reset the system’s
parameters to their factory defaults.